Drones
SPD25 Pilot SPD25 AI Pro Powerline Industrial Cleaning About Contact Get a Quote →
Backed by & engaging with
  • ARM Hub
  • Founders Factory
  • Government of Western Australia
  • EnergyLab
  • Innovate Moreton Bay
Compared with today

The same clean.
Nobody at height.

How cleaning at height is done today, and what changes with the SPD25.

Rope access
Scaffolding or lift
ProxGrid SPD25
People at height
Technicians on ropes
Workers on the scaffold or in a basket
None. Pilot and crew stay on the ground
Before cleaning starts
Anchors, rigging and a rescue plan
Erect the scaffold or bring in and position a lift
Unfold, connect the hose, fly
Work-at-height rescue plan
Required
Required
Not needed for the crew
Ground equipment
Ropes, harnesses, pump
Scaffold or lift, pump
Standard pump (up to 3500 PSI, 30 L/min) and hose
Reach
Where anchors allow
Limited by scaffold or lift height
Up to 50 m
Our drones

Meet our drones.
Built to do the work.

Most drones are cameras with propellers: they inspect, film and report, and someone still has to go up and do the job. Ours carry a high-pressure line to the surface and do the physical work themselves.

The SPD25 Pilot on the left, with black landing gear and a high-pressure hose, next to the SPD25 AI Pro on the right, with an orange body shell and chrome landing gear
Designed and manufactured in Australia
Made in Australia

Designed and manufactured
in Australia.

Every ProxGrid drone is designed and manufactured in Brisbane, helping build Australia's own capability in aerial robotics.

Sovereign capabilityWork on Australia's infrastructure shouldn't depend on overseas supply chains. Building aerial robots here keeps the know-how, the jobs and the control onshore.
Support close byOur engineers are in Brisbane, in your time zone. Parts, repairs and advice come from the people who designed and built the drone.
Built with local operatorsWe develop our drones alongside Australian contractors and asset owners, so they fit the way work is actually done here.
The team

Built by people who've
done this work.

We've built drones for live powerlines and worked the ground crew on insulator washing. The SPD25 comes from that experience.

Propel-AIR 2026 finalist
Rasmus Gupta
Rasmus Gupta
Founder & CEO · LinkedIn

10+ years designing drones and robotics for industrial applications, including drones for live powerlines.

Aiden Cairns
Aiden Cairns
Co-founder & COO · LinkedIn

Commercial helicopter and drone pilot who has worked as ground crew on powerline insulator cleaning operations.

Who it's for

Built for three types
of operator.

Two drones, each built for the work they do: the SPD25 Pilot for industrial cleaning, the SPD25 AI Pro for the most demanding jobs.

Customer Type 01
Industrial Facility Managers

Operations and maintenance managers responsible for tanks, cooling towers, stacks and façades at height. The SPD25 is an alternative to scaffolding and rope access for routine cleaning.

Industrial cleaning
Customer Type 02
Cleaning & Aerial Service Providers

Cleaning contractors and drone operators who want a heavy-lift, purpose-built spray drone to build a service around, with setup and support from ProxGrid.

Talk to us
Customer Type 03 In development
Transmission Network Operators

Network operators maintaining high-voltage insulators. We're developing the SPD25 for insulator washing that today needs helicopters or live-line crews.

Powerline maintenance
Rope access technician pressure washing the side of a large industrial tank
Today: rope access cleaning
Application 01

Industrial
Cleaning.

Pressure washing for tanks, towers, roofs and façades.

  1. 01
    No scaffolding, lifts or ropesReach surfaces up to 50 m high straight from the ground.
  2. 02
    Crews stay on the groundLess time at height, less rescue planning, lower risk.
  3. 03
    Uses the gear you already haveStandard pumps up to 3500 PSI and 30 L/min, and standard high-pressure hose.
Industrial cleaning in detail
Helicopter hovering beside a transmission tower, washing an insulator string with a long spray lance
Today: helicopter insulator washing
Application 02 · In development

Powerline
Maintenance.

Insulator washing, without the helicopter.

  1. 01
    Take the helicopter off the jobAerial washing without rotorcraft hire, standby or positioning costs.
  2. 02
    Keep crews out of harm's wayNo one on the tower or in a bucket next to the line.
  3. 03
    Wash on your scheduleNo waiting on aviation or specialist live-line crew availability.
Powerline maintenance in detail
Trial programme

See it work on
your own site.

01
Review
Your site and surfaces

We look at your site, the surfaces and how you clean them today, and agree what a good result looks like.

02
Trial
On-site trial

We bring the SPD25 Pilot to your site and clean a defined area, with your team watching from the ground.

03
Decide
Results and next steps

We go through the results together. If it fits your work, we agree how to take it further.

Try it on your site.

Book a trial and we'll clean a defined area of your structure with the SPD25, with your team watching from the ground.